Results 1 to 8 of 8
Thread: paper type
Hybrid View
-
10-29-2005, 02:24 PM #1Registered User Promoted
- Join Date
- Oct 2005
- Location
- So.Cal.
- Posts
- 47
paper type
Does anybody know what weight and type paper is used for blue prints. I currently use 24# uncoated bond and am seeing cracking on well used prints. While well used blue prints I have seem to just get softer instead of cracking.
Thanks, Hans
-
10-30-2005, 03:13 AM #2Having Fun is Job 1.
- Join Date
- Feb 2004
- Location
- Carlisle, PA
- Posts
- 1,697
I use 20lb bond in 36" x 150' rolls thyat I get for about $11.00/roll from:
http://www.dswebengine.com/jgproducts/default.asp
I also print an additional 5 plan sets on 11x17 paper for the builder and some of his folks to carry around in their trucks, and because they are easier to manage on a windy day. I also e-mail them the PDF file of the plan so they can print pages for whoever needs them.
FitchX2 <latest>
You have until you release the drawing to get it right, Mother Nature and the Customer have forever to see if you did. (By me, 1971. )
For a successful technology, reality must take precedence over public relations, for nature cannot be fooled. Last sentence in the Feynman Appendix to the Challenger Report by R. Feynman
Never allow those who would substitute intimidation and guilt trips for knowledge and reason to influence your technical judgement. Me, 1993.
-
10-30-2005, 07:03 AM #3Registered User Promoted
- Join Date
- Aug 1999
- Location
- Ridgway, Colorado, USA
- Posts
- 2,917
I have found that the opaque bond papers does not age very well. The lighter translucent bonds can tare fairly easily but do not have the aging problem. If you use your printer as a copy machine then you don't want to go to the more expensive vellums that are available...unless cost is no object.
I realize that many commercial printers use large production printers to make multiple sets of prints but do you have a true production level printer? In other words, can you make one set and let the contractor got to a local printer for the prints he needs? I know one contractor that laminates one set for the job site. In that case the quality of the paper is not an issue.
Just something to think about.Larry
Lawrence C. Kumpost, Architect
No matter how much you push the envelope, it'll still be
stationery.
-
10-30-2005, 08:00 AM #4Having Fun is Job 1.
- Join Date
- Feb 2004
- Location
- Carlisle, PA
- Posts
- 1,697
Originally posted by Larry Kumpost
I realize that many commercial printers use large production printers to make multiple sets of prints but do you have a true production level printer? In other words, can you make one set and let the contractor got to a local printer for the prints he needs?
I know in California, with all the notes and title 24 stuff, 30 sheets for a single house isn't unusual, here it runs 12 to 20 sheets depending on the complexity of the house and the township its being built in.
FitchX2 <latest>
You have until you release the drawing to get it right, Mother Nature and the Customer have forever to see if you did. (By me, 1971. )
For a successful technology, reality must take precedence over public relations, for nature cannot be fooled. Last sentence in the Feynman Appendix to the Challenger Report by R. Feynman
Never allow those who would substitute intimidation and guilt trips for knowledge and reason to influence your technical judgement. Me, 1993.
-
10-30-2005, 08:31 AM #5Registered User Promoted
- Join Date
- Aug 1999
- Location
- Ridgway, Colorado, USA
- Posts
- 2,917
Hi Fitch:
Yes. Local conditions do tend to limit options.
We still have the relatively inexpensive diazo (ammonia) printing available. That seems to be going the way of the Dodo Bird. I suspect that this type of printing will only last as long as the printers current equipment does.Larry
Lawrence C. Kumpost, Architect
No matter how much you push the envelope, it'll still be
stationery.
-
10-30-2005, 05:18 PM #6Registered User Promoted
- Join Date
- Mar 2003
- Location
- MEDFORD, OR
- Posts
- 34
Printing
Here is a thought for you-
We purchased a HP 4000ps @ $11,100. It prints a "D" size sheet in 45 sec. We use a 24 lb. paper and have figured our cost with ink @ $.45 a sheet (36" x 300' roll). We do all the prints for our clients @ $1.30 a sheet. Most clients get 15 sets and an average of 10 sheets per set. We net $.85 per sheet x 10 = $8.50 a set x 15 sets = $127.50 a house. $11,100 / $127.50 = 87 houses and the plotter is paid for.
There is some time envolved in binding but when your printing one it's not that much more to just fire out the rest. We do alot of printing so for us it makes sense.
We did the same trick with our older HP 1050c plus & HP1055ps
The paper we use is water-resistant and has a very light blue tinge to it. Our builders love it plus the plans are in color.
Darren
-
10-30-2005, 10:04 PM #7Registered User Promoted
- Join Date
- Oct 2005
- Location
- So.Cal.
- Posts
- 47
re:paper type
Sorry I guess I left out that I have a designjet 500, and am pleased with it. If I can only find a good quality paper.
Darren, you said you use a water resistant paper? could I ask what brand and type it is. I also do my prints in color.
Thanks Hans
-
11-01-2005, 01:51 PM #8Registered User Promoted
- Join Date
- Mar 2003
- Location
- MEDFORD, OR
- Posts
- 34
Paper
Oc'e 86-1024 Inkjet color bond . That's for a 36" x 300' roll @ 24 lb. Don't know the # on the 24" wide. It's great paper at a good price. We pay $32 roll.
Darren