Results 1 to 7 of 7
Thread: Fascia and roof problem
-
10-11-2005, 02:46 AM #1
Registered User Promoted
- Join Date
- Dec 2004
- Posts
- 23
Fascia and roof problem
Help! Why is this allways happening to me??
Mats Tiderman
-
10-11-2005, 05:15 AM #2
Registered User Promoted
- Join Date
- Aug 1999
- Posts
- 6,414
where is your camera origin in the elevation?....
-
10-11-2005, 06:48 AM #3
Registered User Promoted
- Join Date
- Dec 2004
- Posts
- 23
The camera is located at first floor.Originally posted by Tim O'Donnell
where is your camera origin in the elevation?....
The roofplanes baseline and fascia tops values are the same.
I have added a picture of the roofplanes.Mats Tiderman
-
10-11-2005, 06:53 AM #4
Designing Livability
- Join Date
- Oct 2000
- Location
- Bloomington, IL USA
- Posts
- 289
Tim was asking if the elevation camera location is outside of the roof planes
Mike
-
10-11-2005, 07:40 AM #5
Registered User Promoted
- Join Date
- Dec 2004
- Posts
- 23
Outside????Originally posted by mlluxarch
Tim was asking if the elevation camera location is outside of the roof planes
The camera origin is outside the building as in the picture below.Mats Tiderman
-
10-11-2005, 09:06 AM #6
Registered User Promoted
- Join Date
- Aug 1999
- Posts
- 6,414
as the camera is outside the roof plane your third image leads me to believe you are using a pline solid for the barrel...it looks like the leading edge o that is in the same plane as the fascia...move it back a 1/16" or so behind the roof edge, so the two surfaces are in different planes
-
10-11-2005, 11:17 AM #7
Registered User Promoted
- Join Date
- Dec 2004
- Posts
- 23
TIM!!!
Thatīs it! now it shows right.
Tank you very very much! This problem has followd me for a year and a half, since i started using Chief.
Thanks again! You saved my day!
Mats Tiderman
Reply With Quote
