2 Attachment(s)
The dsh Terrain Building Test
This is a three part test. You are to recreate the model pictured below
Part 1: Build a 20X30 house.... easy peasy
Part 2: Determine the ELEVATION OF THE TERRAIN PERIMETER
you can use Doug Park average ht. method (this comes from this thread http://www.chieftalk.com/showthread....799#post423799)
Quote:
Originally Posted by
Doug Park
The average is the average height of the terrain. A terrain may not be flat so in general this gets the terrain in the ball park. I would recommend setting the height manually for precise control.
Part 3: Build the terrain as pictured below. Note the terrain contour callouts are automatic, that is part of the test.
I am curious as to what everybody set there TERRAIN ELEVATION at.
The challenge to Doug Park and the CA staff.....
Doug, do me a favor and see how you folks at CA build this model. I am sure the model is an easy 5 minute build, but what may be interesting is to find out at what elevation everybody sets their terrain perimeter at. Your recommendation is the average...... well, so what is the average, and do they get the correct contour elevations that I have specified in the previous post.