Is there an easy way to setup line weights in cross sections, I do a zoom on a cross section and everything looks like it is just one layer. Never had this in 10 where I had to adjust any line weights. All help appreciated.
Printable View
Is there an easy way to setup line weights in cross sections, I do a zoom on a cross section and everything looks like it is just one layer. Never had this in 10 where I had to adjust any line weights. All help appreciated.
was gettin upset at the same thing last night. Layers, cross section lines i do believe. default is 35 i think. change to 5 and you'll be a lot happier
thanks les, I will try that. Is that on each layer of wall?
David, I would also check the "page setup". Using V10 settings could cause this in X2. The settings between V10 and X2 are very different.
Make sure you do a print test before committing to a line weight of 5 as that is extremely fine. 18 is considered a fine line by normal CAD standards assuming you are using the X2 defaults.
Thanks Tommy, is that the printer page setup? Doug I have been changing layers in wall set so i can see them better in zooming in to 12 for walls and 6 for drywall. Is this where I should do it?
Thanks Allen
Thank you Allen. David, if you're bringing V10 plans forward to X2, you'll also have to change the lineweights in the 'layer options" from plan. These go hand in hand.
Off subject, had older plan with no garage, added breezeway and attached garage, Is there a way to generate framing for new add on without messing up framing for exiting?
Another possibility is that he has "show line weights" selected or has too high a number selected in Preferences/Appearance/Line Weights.
David seems to be referring to what he's seeing on his screen, not the printed output.
Just a thought.......
Jim
Manually frame all the new stuff. Existing wall framing will have to be retained before you rebuild wall framing for the new walls.
Jim
Thanks guys, really appreciate it!!!!!
Can not get my overhang and facia to show up in render overview on the new breezeway and garage I added on. Have reframed roof and overhangs, checked each roof section for soffits and facia, made sure layer are on, can't think of anything else. This plan was brought up from 10, but new stuff added. really need help on this one. Thanks